NavigationOn-line Cutting Repair for FTM Compound Crusher
Roller drum, as the key part of compound crusher, can decide the working efficiency. If roller drum is seriously worn out, surface of roller drum will not be in cylinder, but in concave with large ends and small middle. At this time, larger materials or briquettes may pass through the worn-out concave month and leak out.
Sometimes, people may be hurt. Therefore, we need to repair the roller drum frequently. There are two ways to repair the roller drum: on-site cutting repair and on-site surfacing repair. This paper mainly discusses about the former one, one-site cutting repair. What is the on-site cutting repair? On rack of compound crusher, there is a specially-used knife holder.
Its movement path is in parallel with axis of roller drum. We turn on the compound crusher first, then use the hand feeding mechanism or automatic feeding mechanism(if possible) to cut or grind the roller drum. When using this method, we should notice the following aspects. Movement path of knife holder must be in parallel with axis of roller drum.
Or else, roller drum would have taper and perform poorly. Besides, we should control the running speed of roller drum. Linear speed of roller drum should be smaller than the cutting speed of knife. Or else, knife would be damaged. To the roller drum with great hardness, this way is inefficient. Click website to get the latest price list of compound crusher!
