Things for Notice When Running the Vertical Crusher

During the working process of vertical crusher, we should often check the loosing condition of springs. If springs become loose or their looseness are not in consistency, press rollers will move around in guide rail and wear rail or bearing shell. If rail and shell are worn out, large briquettes will be much easier to pass through.

Viscous materials are easy to block the crushing chamber. When dealing in the blocking failure, we need to turn off vertical crusher immediately. After every run of compound crusher, we need to clean the dust inside and lubricate the bearing, toothed gear or transmission parts for 2 or 3 times.

During the working process, bearing temperature should be smaller than 60℃. If it is higher than 60℃, we need to make a shut-down check. To check the working condition of belt pulley, we can rotate it with hands. If compound crusher runs quickly and in relax, we can turn on the dynamo.

If safety pin is suddenly cut off, power will be in failure. When we face this situation, we should firstly make a power dump and avoid the accident if power is alive. If foreign matters enter into crushing cavity during the working process or lager briquettes block the compound crusher, we can directly cut off the power switches for check.

To the parts which have many dust leak off, we can cover them with sealed cowling. To avoid the secondary pollution caused by dusts, we need to clean them immediately. Click website to get the latest price list!